4 | Advanced Configuration |
Figure 4-2: Local Address Menu Screen
DHCP Server Tab
The DHCP Server tab enables Dynamic Host Configuration Protocol (DHCP) server functionality on the LAN, allowing the router to dynamically assign lease IP addresses to clients that connect to it from the local network.
Table
Field or Button | Description |
Enable DHCP Server | If selected, the DHCP server on the |
| gateway assigns IP addresses to the |
| computers and other hosts on your |
| network if they have DHCP enabled. By |
| default, the gateway server is enabled. If |
| there is another DHCP server running on |
| your network (on another router), you |
| must disable one of the DHCP servers. |
| If not selected, you must carefully |
| configure the IP address, Subnet Mask, |
| and DNS settings of every host on your |
| network. Do not assign the same IP |
| address to more than one host. Your |
| gateway must be on the same subnet as |
| the other hosts. |
|
|
DHCP Server IP Address | Enter the default port forwarding LAN |
| Client IP Address. |
|
|
| |
| APR 2009 |
