Manuals / Brands / TV and Video / DVR / Motorola / TV and Video / DVR

Motorola DCT3412 Operational Check for the Remote Control , Optimizing the High-Definition Settings

1 77

Download 77 pages, 2.61 Mb

3-20 Installation

Code Description When Error Occurs Action Required

during attempted download operator

Eb15 No matching Platform

ID found

After cycling twice through the OOB

frequencies (LED then displays Eb 02,

indicating the software object download

was unsuccessful.)

Contact headend

operator

Eb18 Object size mismatch After the LED displays dl, indicating failed

during attempted download

Contact headend

operator

Eb19 Object size failed range

check

After the LED displays dl, indicating failed

during attempted download

Contact headend

operator

Eb20 Invalid SUDB pointer After plugging the terminal into an electrical

outlet to begin the boot cycle

None

Operational Check for the Remote Control

The operational check tests communication with the remote control:

Table 3-3

Operational check procedures

Feature Testing Procedure

Power on Press POWER on the remote control to turn on the DCT3412.

Tune to the output channel (3 or 4).

Channel selection Scan through the channels using the CHANNEL + or - keys.

Tune to several channels by entering the channel number using the numeric keys.

Volume control Press VOLUME + or - on the remote control to increase the volume to its upper limit,

lowest level, and to a comfortable level.

Press MUTE to turn the sound off. Press MUTE again to restore the sound.

If the DCT3412 does not operate properly, refer to Section 5, “Troubleshooting.”

Optimizing the High-Definition Settings

This subsection describes how to optimize standard and HD video settings and closed captioning

based on subscriber preferences.

Before you optimize the output settings:

 Connect the DCT3412 to other home entertainment devices

 Plug the DCT3412 into a power outlet

 Perform the boot cycle

 Initialize the DCT3412 and authorize services

 Turn the TV on

For an HDMI connection, be sure the TV is on and connected to the HDMI connector before

adjusting the settings. Motorola recommends using HDMI cables less than 20 meters long.

DCT3412 Installation Manual

Contents

Main CAUTION Caution Special Symbols That Might Appear on the Equipment IMPORTANT SAFETY INSTRUCTIONS FCC Declaration of Conformity Canadian Compliance Contents Page Page Tables Introduction Features Tuners Standard Audio/Video Features Standard DVR Functionality Standard Data Features Standard Miscellaneous Features Available Optional Features Using This Manual Related Documentation Document Conventions Introduction 1-5 If You Need Help DCT3412 Installation Manual Http://businessonline.motorola.com888-944-4357 / 215-323-0044 / 888-944-HELP Technical Response Center Telephone Menu Options Calling for Repairs Section 2 Overview This section describes the front and rear panel. Front Panel Figure 2-1 Front panel Rear Panel Figure 2-2 Rear panel Key Item Function Installation Important Safety Considerations During Transportation to the Subscriber Home During Installation Before You Begin Clearing the Hard Drive Video Connection Options Audio Connection Options Installation Overview Connecting to an HDTV Video Only Page Cabling to an HDTV Audio Only Connecting to an A/V Receiver Audio Only Connecting to a Stereo TV Connecting a Stereo TV Page Connecting a Stereo TV and Stereo VCR Connecting an A/V Receiver, TV, and VCR Page Page Installing the Optional IR Blaster Locating the IR Receiver on the VCR Connecting the IR Blaster Checking the IR Blaster Data Device Connections Boot Cycle Page Boot Cycle Error Codes Code Description When Error Occurs Action Required Operational Check for the Remote Control Optimizing the High-Definition Settings Page Setting Description Graphics Overlaying the Video Additional HDMI Settings Diagnostics Using the Diagnostics d01 General Status The General Status fields are: Field Description d02 Purchase Status The Purchase Status fields are: Field Description d03 Out-Of-Band (OOB) Status The Out-Of-Band Status fields are: Field Description OSD LED Description d04 In-Band Status Page d05 Unit Address This diagnostic displays the unit address: Page d06 Current Channel Status Page Page d07 RF Modem (Upstream) The RF Modem fields are: Field Description d08 Code Modules The Code Modules fields are: Field Description OSD Status Description d09 Memory Configuration d10 KeypadLED d11 Interface Status The Interface Status fields are: Field Description Field Description d12 User Setting Status Page d13 DVR/Hard Drive Status This two-page diagnostic displays the DVR and hard-drive status. The DVR/Hard Drive Status fields are: Field Description Standby The hard drive is working normally, but is at rest. (The State returns to Active The hard drive is accessing data. Failed The hard drive hardware has failed. Yes The internal drive temperature exceeds 140 F (60 C). The LED No There is no over-temp problem. d14 DOCSIS Status This three-screen diagnostic displays status information for the embedded cable modem (ECM): Page Page Page d15 Application Specific Information This diagnostic displays information about application servers: The fields are: Field Description d16 Interactive Status Figure 4-10 Interactive status LED display The Interactive Status fields are: Field Description Page Section 5 Troubleshooting Page Page Appendix A Specifications Connection Record Abbreviations and Acronyms