Manuals / Brands / TV and Video / DVR / Motorola / TV and Video / DVR

Motorola DCT3412 Additional HDMI Settings

1 77

Download 77 pages, 2.61 Mb

3-24 Installation

Additional HDMI Settings

If an HDMI TV or home theater receiver is connected to the HDMI port, you can display the

Additional HDMI Settings screen. These settings are set based on the preferred settings of the

display device when initially connected to the set-top. These settings are not available if a DVI

device is connected to the set-top using an HDMI-to-DVI adapter.

ADDITIONAL HDMI SETTINGS

NOTE: CHANGING THESE VALUES MAY RESULT

IN LOSS OF AUDIO AND/OR VIDEO

> HDMI/DVI MODE: HDMI

COLOR SPACE: RGB

AUDIO OUTPUT: AUTO

RETURN TO MAIN PAGE >>>

RESTORE AUTOMATIC SETTINGS

CAUTION!

We recommend not changing the Additional HDMI Settings unless you have

problems with your HDMI connection. Changing these settings may cause

the loss of audio and video. These settings are established automatically

when the HDMI device is connected to the set-top based on data shared

between the device and the set-top. The Additional HDMI Settings are

intended for use by advanced users for troubleshooting only.

The Additional HDMI Settings are:

Setting Description

HDMI/DVI Mode Set the HDMI port to one of:

 HDMI — recommended for an HDMI display device

 DVI — the HDMI audio capability is disabled and the DVI

signal format is used for video so that the HDMI port

operates as a DVI port

Color Space Sets the palette of colors available to create the display image.

Each HDMI device works better with a particular color space:

 RGB — most HDMI devices prefer this color space

 YCC 4:4:4

Audio Output Sets the audio mode for the HDMI connection:

 Auto — the set-top supplies audio in the format supported

by the HDMI device

 L-PCM — two-channel digital audio format similar to a

compact disc

 Pass Through — the audio formats received by the set-top

are automatically passed out of the HDMI port, even if the

HDMI device has not indicated support for those formats

Return to Main

Page

Returns to the User Settings menu.

Restore Automatic

Settings

Restores the Additional HDMI Settings on this screen only as

preferred by the HDMI device

DCT3412 Installation Manual

Contents

Main CAUTION Caution Special Symbols That Might Appear on the Equipment IMPORTANT SAFETY INSTRUCTIONS FCC Declaration of Conformity Canadian Compliance Contents Page Page Tables Introduction Features Tuners Standard Audio/Video Features Standard DVR Functionality Standard Data Features Standard Miscellaneous Features Available Optional Features Using This Manual Related Documentation Document Conventions Introduction 1-5 If You Need Help DCT3412 Installation Manual Http://businessonline.motorola.com888-944-4357 / 215-323-0044 / 888-944-HELP Technical Response Center Telephone Menu Options Calling for Repairs Section 2 Overview This section describes the front and rear panel. Front Panel Figure 2-1 Front panel Rear Panel Figure 2-2 Rear panel Key Item Function Installation Important Safety Considerations During Transportation to the Subscriber Home During Installation Before You Begin Clearing the Hard Drive Video Connection Options Audio Connection Options Installation Overview Connecting to an HDTV Video Only Page Cabling to an HDTV Audio Only Connecting to an A/V Receiver Audio Only Connecting to a Stereo TV Connecting a Stereo TV Page Connecting a Stereo TV and Stereo VCR Connecting an A/V Receiver, TV, and VCR Page Page Installing the Optional IR Blaster Locating the IR Receiver on the VCR Connecting the IR Blaster Checking the IR Blaster Data Device Connections Boot Cycle Page Boot Cycle Error Codes Code Description When Error Occurs Action Required Operational Check for the Remote Control Optimizing the High-Definition Settings Page Setting Description Graphics Overlaying the Video Additional HDMI Settings Diagnostics Using the Diagnostics d01 General Status The General Status fields are: Field Description d02 Purchase Status The Purchase Status fields are: Field Description d03 Out-Of-Band (OOB) Status The Out-Of-Band Status fields are: Field Description OSD LED Description d04 In-Band Status Page d05 Unit Address This diagnostic displays the unit address: Page d06 Current Channel Status Page Page d07 RF Modem (Upstream) The RF Modem fields are: Field Description d08 Code Modules The Code Modules fields are: Field Description OSD Status Description d09 Memory Configuration d10 KeypadLED d11 Interface Status The Interface Status fields are: Field Description Field Description d12 User Setting Status Page d13 DVR/Hard Drive Status This two-page diagnostic displays the DVR and hard-drive status. The DVR/Hard Drive Status fields are: Field Description Standby The hard drive is working normally, but is at rest. (The State returns to Active The hard drive is accessing data. Failed The hard drive hardware has failed. Yes The internal drive temperature exceeds 140 F (60 C). The LED No There is no over-temp problem. d14 DOCSIS Status This three-screen diagnostic displays status information for the embedded cable modem (ECM): Page Page Page d15 Application Specific Information This diagnostic displays information about application servers: The fields are: Field Description d16 Interactive Status Figure 4-10 Interactive status LED display The Interactive Status fields are: Field Description Page Section 5 Troubleshooting Page Page Appendix A Specifications Connection Record Abbreviations and Acronyms