4-22 Diagnostics
The DVR/Hard Drive Status fields are: Field Description
Enabled Indicates whether the DVR is enabled, based on the DCT3412 Connected State
(CONNECTED or DISCONNECTED) and resource availability (resource authorized;
hard disk installed and functional):
OSD LED Description
True En DVR enabled
False Un DVR disabled
Stream Indexer Ver. The stream indexer version number, without leading zeros; for example, version
0000000065 is displayed as “65”
Content Record Ver. The content record version number, displayed without leading zeros
Number Indicates the encoder number — 1 or 2
Type Indicates the encoder type — Not Inst(alled), MPEG2, Other, or Unknown
Drive The drive type — IDE (internal), 1394, USB (external), or NOT AVAILABLE (neither
enabled nor configured)
Record Capacity
Remaining
The remaining recording capacity, in bytes
Number of Installed
Drives
The number of internal and external hard drives, up to a maximum of 9
Drive The identification number sequentially assigned to each installed drive and whether
the drive is INTERNAL or EXTERNAL
Model Number The drive model number assigned at the factory
Device ID A text string of up to 20 characters that identifies the disk drive; “N/A” is displayed if the
value is invalid or cannot be retrieved
Type The drive type — IDE, 1394, USB, or Unkn(own)
Total Size The drive size in decimal GB. (1 decimal GB = 1x109 bytes. For example,
120 decimal GB = 120x109 bytes.)
System, GPFS,
PVR Content, and
PVR Index
The space used and allocated for each of the internal hard drive’s partitions —System,
GPFS, PVR Content, and PVR Index — in MB for each partition (1 binary MB = 220
bytes). “N/A” displays if the value is invalid or cannot be retrieved.
State The hard drive state:
Standby — The hard drive is working normally, but is at rest. (The State returns to
Active any time disc access is necessary.)
Active — The hard drive is accessing data. Failed — The hard drive hardware has failed.
Temp (F) F or an internal hard drive only, its temperature in degrees F
Max Temp For an internal hard drive only, its maximum temperature in degrees F
Over Temp Indicates whether the drive is excessively hot:
Yes — The internal drive temperature exceeds 140º F (60º C). The LED
Over-Temp Indicator is on and remains lit until the next over-temp sample is taken
(at least once an hour).
No — There is no over-temp problem.
Count The cumulative number of times that the hard drive temperature has been measured
over 60º C, with the temperature checked at least once an hour.
DCT3412 Installation Manual