3-4

Advanced Radio Operations: Accessing the Advanced Menu

 

 

Remote Monitoring (DTR410 and DTR650 Models Only)

NOTE: Manager Mode must be enabled in order to use this feature. Refer to page 4-9.

Remote Monitoring allows you to monitor a selected radio either for training purposes or if the target radio user is unable to press the PTT button.

1.From the Advance menu, scroll to highlight Remote Monitor and press under Select. The Remote Monitor screen appears.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

2.Scroll to highlight a radio from the list to monitor and press under Select. The screen changes to show the radio’s status.

Remote Time (DTR410 and DTR650 Models Only)

Remote Time synchronizes the date and time to all other radios. It transmits the time on all channels set as contacts in the transmitting radio. Any receiving radio must have the transmitting radio User ID in their contact list to accept the time/date update.

NOTE: Radios must be turned on and within range to receive this broadcast message. The transmitting radio does not receive a confirmation for any failures.

1.From the Advance menu, scroll to highlight Remote Time and press under Select. The screen displays a confirmation to start remote time.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

2. Press under Yes.

NOTE: For more information on DTR products, visit the following website at: <http:// www.motorola.com/DTR/>.

November 2008

9980384R89-E

Page 46
Image 46
Motorola manual Remote Monitoring DTR410 and DTR650 Models Only, Remote Time DTR410 and DTR650 Models Only