General Radio Operations: Settings

2-17

 

 

7.After completing the time setting press under Done to complete the setting and to return to the previous menu.

Setting the Volume

The functions of the various selections are as follows:

Ringer: volume level for all data status alerts such as Alert Tones and incoming SMS Messages. Turning VibraCall on changes this level to 0.

Speaker: volume level for voice messages.

Keypad: volume level for keypad presses.

Alarm: volume level for the Alarm feature, which is overridden by VibraCall.

NOTE: Ambient Noise only increase and decrease the mic sensitivity.Alarm:

Talk Permit Tone (TPT) Offset Volume: volume level setting.

NOTE: For TPT Offset, the volume can only be changed by highlighting TPT Offset and then pressing the Volume Control keys.

From the Settings menu, scroll to highlight Volume and press under Select. The Volume menu appears.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

NOTE: Highlighting any of the volume choices and pressing the Volume Control keys automatically adjusts the volume levels.

NOTE: Pressing the Volume Control keys while not in the Volume menu only sets the Speaker Volume.

Setting the Ringer Volume

1.From the Volume menu, scroll to highlight Ringer and press under Change. The Ringer screen appears.

NOTE: The procedure for Ringer is same as for the rest of the volume expect TPT. The Up and Down button has to be used for volume changing.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿

9980384R89-E

November 2008

Page 39
Image 39
Motorola DTR410 Setting the Volume, Talk Permit Tone TPT Offset Volume volume level setting, Setting the Ringer Volume