Motorola DTR410 manual Cloning Mode Adding/Deleting a Contact

6-4 Cloning Mode: Adding/Deleting a Contact

7. Press under Change.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

8. Scroll to the contact to receive the new contact.

9. Press under Select to select the contact.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

10.Press under Prgm. The screen is displayed showing the Add: and To: selections. If

these are correct press under Go to transmit the selection over the air. If the selections

are not correct press under Back to return to the selection menu

NOTE: When selecting contacts to OTA clone from the contacts, there is an option to select All. This allows the user to either clone all contacts from one radio to another or to clone to all contacts.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

11.The screen displays the message "Clone Sending XXXXXXX". X = the contact you are send- ing to. If sending a contact to a PrivateGroup, the display shows each target radio individually.

If cloning was successful, both the source and targets radios indicated “Programming Successful”. If over-the-cloning to a PrivateGroup fails, the radio displays the failed clone list. The user can attempt cloning again to any members of this list.

For more information on DTR products, visit the following website at: <http://www.motorola.com/ DTR/>.

November 2008 9980384R89-E