Motorola ENHANCED CELLULAR TELEPHONE owner manual Deleting a Memory Entry, Changing a Memory Entry

Storing Numbers in Memory

Deleting a Memory Entry

1.Press and hold CLR , then press STO , and enter the two-digit location number you wish to delete.

2.The phone will display FULL, flash the number in memory, followed by ChAngE?.

3.Press STO to delete, or press END to exit without deleting the entry.

Changing a Memory Entry

1.Press RCL and the two-digit location number so that the number to be changed is displayed.

2.Repeatedly press CLR to “back out” each of the digits displayed (all the digits, or just the ones you wish to change).

3.Enter the new digits.

4.Press STO and the same two-digit location number.

5.The location number and FULL will display. The display will then alternate between the currently stored number and ChAngE?.

6.Press STO to save the newly entered number in this memory location, overwriting the currently stored number.

14