Cellular System Information
Two-System Operation
Your cellular telephone is equipped with a feature that allows you to maintain two telephone numbers from two different system operators. Both are designated as your ‘home system’ but are accessed separately. At the time your phone was programmed, you elected whether to enable this feature and which two systems would be treated as your home systems.
While you may switch from one system to the other, only one of the two can be active at any given time. Calls are placed and received through the active system only.
To switch from one system to the other:
1.Press RCL , 
, STO .
2.The display will blank to confirm the switch and the newly activated number will appear.
3.When you have finished viewing, press CLR .
If you have two phone numbers programmed into your phone, each time the phone is turned on, it displays a message indicating which home system type and phone number is currently active. Possible messages are as follows:
System Type and Phone Number
Display
A1 | |
|
|
A2 | |
|
|
Wireline (B type) with phone number 1 | b1 |
|
|
Wireline (B type) with phone number 2 | b2 |
|
|
If a call is placed to the inactive phone number, the caller will receive the “Not in Service” message.
43
