Special System Features
the oldest message is deleted, the rest of the messages are shifted down one location, and the new message is stored in location #1.
Recalling/Viewing Calling Line ID Messages
1.Press RCL and release, then press RCL again and hold until one of the following messages appears in the display:
HHnEQW (HH is the number of new messages)
OOnEQW (when there are no new messages)
no M<ESgS (when there are no old or new messages)
2.Scroll through the messages in the message center by
pressing 
to move forward and 
to move backward.
3.Press END to exit the message center.
As you scroll through the messages, each Calling Line ID message will be labeled with either HH nEQW (new message) or HH Cid (old message), where HH is the message center location number. As you view each message, the display will cycle through the Calling Line ID information (as shown in the following example) until you scroll to the next message or place a call to the displayed number.
Example 18475551212
Placing a Call to a Calling Line ID Number
After recalling the desired Calling Line ID number (the number appearing in the display), press SND to place a call to this number.
27
