Motorola HK1223 manual COM Ports, HDD Heater

COM Ports

Allows you to configure the COM ports of the computer.

COM1 / 2 (FIR) / 3 / 5 / 6 Settings sets the I/O (Input/Output) address and the Interrupt ReQuest line (IRQ) settings of the COM ports. The options are Disabled; COM1, 3F8, IRQ4; COM2, 2F8, IRQ3; COM3, 3E8, IRQ6; COM5, 3E0, IRQ5; COM6, 2E0, IRQ10.

HDD Heater

Sets if the system automatically turns on the built-in hard disk drive heater for low temperature operation. A check mark (√) indicates enabled, while underline (_) indicates disabled.

NOTES:

To use the HDD heater feature, the MTCCTRL driver supplied with your computer must be installed (see chapter 6 for details).

Disable this item to conserve energy when using battery power.

5-8 Setup Configuration Utility (SCU)