Motorola i615 manual Getting Started, Set Nmea OUT to On, Set Nmea OUT to Off

GPS Enabled

Getting Started

To connect your phone to your laptop or other device:

1Open the connector cover.

connector cover

2With the phone’s display facing up, insert the serial data cable’s connector into the accessory connector, until you hear a click.

3Insert the data plug into the COM port of your laptop or other device.

Make sure no other application is using the COM port selected.

Make sure the COM port settings of your laptop or other device are set to the following:

•Bits per second: 4800

•Data bits: 8

•Parity: None

•Stop bits: 1

•Flow control: Hardware

To set your phone to send location information to your laptop or other device:

1From the main menu, select GPS > Interface.

2Set NMEA OUT to On.

Your phone is now sending location data to your laptop or other device.

To stop your phone from sending location data to your laptop or other device:

Set NMEA OUT to Off.

Each time you power your phone on, NMEA OUT is automatically set to Off.

138