Motorola i670 Features for the Hearing Impaired, Making TTY Calls, Turning On the TTY Feature

Models: i670

1 164
Download 164 pages 48.43 Kb
Page 62
Image 62

To use these services, you must install the iDEN Wireless Data Services software (available separately). For more information on setting up your computer and your i670 phone for packet and circuit data calls, refer to the Wireless Data Services User’s Guide or contact your service provider.

Features for the Hearing Impaired

Making TTY Calls

Note: This feature may not be offered by your service provider.

To use your phone to make phone calls using a teletypewriter (TTY) device:

1Connect one end of a 2.5mm cable into the audio jack on your phone. Connect the other end of the cable to your TTY device.

2Make sure that your phone’s TTY feature is on and select the TTY mode you want to use.

3Use your phone to enter phone numbers and make calls.

Features for the Hearing Impaired

When you make a TTY call, these icons appear on the phone’s display:

NPhone call is active.

OPhone call is on hold.

TTY device features such as Turbo-Code, High-Speed, and Interruption are not supported by your phone. These features must be turned off or disabled to use your TTY device with your phone.

Turning On the TTY Feature

Your phone’s TTY feature must be on if you want to make TTY calls, set the TTY mode, or change the TTY baud rate. To make sure the TTY feature is on:

From the main menu, select Settings > Phone Calls > TTY > Use TTY. This field must say On.

Choosing a Mode

Your phone supports these TTY modes:

TTY — You type and read text on your TTY device.

VCO (Voice-Carry-Over) — You speak into your phone and read text replies on your TTY device.

53

Page 62
Image 62
Motorola i670 manual Features for the Hearing Impaired, Making TTY Calls, Turning On the TTY Feature, Choosing a Mode