137

Attaching a Headset

Using a Headset
If you use a headset or similar device with your
phone, you can set your phone to send incoming
sound to the heads et only, or to the headset and the
speaker at the same time:
1From the main menu, sele ct Settings >
Advanced > Headset/Spkr.
2Select HdsetOnly to send incoming sound to the
headset only. -or-
Select Hdset&Spkr to send incoming soun d to
the headset and ring tones to the speaker.
Note:If you are using your phone with a headset,
and you have the Flip to End o ption set to
On, closing your flip sends incoming sound
to the headset and does not end the call.
See “Setting Flip A ctions” on page 47.

Attaching a Headset

1Lift the audio jack cover.
2Insert the headset connector firmly in to the audio
jack. You may have to rotate the headset
connector until it fits s ecurely into the audio jac k.

Using a Remote BoostTM

Walkie-Talkie Button

If you are using a headset or other accessory with a
remote BoostTM walkie-talkie button, you can use the
remote BoostTM walkie-talkie button for phone calls
and BoostTM walkie-talkie calls.
For phone calls, use the remote BoostTM
walkie-talkie butto n to answer calls, switch betwee n
calls, and end calls. Hold the remote BoostTM
walkie-talkie button for less than 2 seconds to
answer calls and s witch between ca lls. Hold the
remote BoostTM walkie-talkie button for more than 2
seconds to end calls.
For BoostTM walkie-talkie calls, use the remote
BoostTM walkie-talkie button as you would the
BoostTM walkie-talkie button on your phone.