To Attach/Remove Antenna | To Attach/Remove Belt Clip |
To attach the antenna, rotate the antenna clockwise onto the top of the radio until hand tight. Reverse to remove. Fig. A
Note: The antenna should always be installed when operating the radio. Operat- ing the radio without an antenna greatly reduces the range of the radio.
1.Align the belt clip to the mounting rails on the back of the radio. Fig. B
2.Push the belt clip down until it clicks into place.
3.To remove, pull tab on belt clip away from radio to release. Fig. C
4.Slide belt clip up and off.
FIG. A | FIG. B |
FIG. C | 5 |
