To Charge Battery With Charger Adapter
1.Turn the radio off.
2.Lift accessory cover and plug the Charger Adapter firmly into the small jack (lower hole). Fig. G
3.Plug the charger into an electric outlet. The light on the charger will glow continuously if charging properly.
4.Allow 10 hours for the battery to fully charge.
Notes:
•For optimum battery life, the battery should not be left charging for prolonged periods after reaching full charge. Charg- ing the battery over the weekend is acceptable.
•Do not transmit while radio is charging. Transmitting while radio is charging can cause the radio transmitter or the charger to operate improperly.
•Turn radio off when charging. If radio is on while charging, at least twice as much time is required to charge the battery.
To Charge Battery With 10 Hour Desktop Charger
Note: The Desktop Charger is optional and may not be included in your package.
1.Connect Desktop Charger and Charger Adapter. Fig. H
2.Charge the battery while inside the radio by placing the radio in the Desktop Charger with radio facing towards you.
You can also charge the battery by remov- ing battery from radio and placing it in Desktop Charger. Silver contacts must face down and arrow points toward front of charger. Fig. H
3.The light on top of the Desktop Charger will glow continuously when radio / battery is inserted. If light does not come on, check radio / battery is properly inserted and check battery/ charger contacts to be sure they are clean. The light will continue to glow until the radio / battery is removed from Desktop Charger.
4.Allow 10 hours for the battery to fully charge.
FIG. G | FIG. H |
7
