Getting Started 1 - 9

Figure 1-8
Swiping a Card
Installing a Secure Digital Card
Use Secure Digital (SD) memory cards to save or back up data.
To install an SD memory card:
1. Power off the mobile computer.
2. Remove the screw securing SD cover and lift the cover out of the slot.
3. If a card is already installed, press the card in to release it, and then remove it.
Figure 1-9
SD Card Installation
4. Ensure that the card is oriented correctly, and slide it into the slot until you feel a click.
5. Replace the SD cover and secure with the screw.
NOTE The card may be swiped in either direction, from left to right, or from right to left. For best results, gently
press down on the card while swiping to ensure contact with the bottom of the reader.
NOTE Do not force the card. If you feel resistance, remove the card, check the orientation, and reinsert it.