Accessories 3 - 5

Battery Charging Indicators
The Single Slot USB Cradle charges the mobile computer’s main battery and a spare battery simultaneously.
The mobile computer’s charge LED indicates the status of the battery charging in the mobile computer. See
Table 1-2 on page 1-5 for charging status indications.
The spare battery charging LED on the cradle indicates the status of the spare battery charging in the cra dle.
See Table 3-1 for charging status indications.
The standard battery fully charges in approximately 3.5 hours and the extended capacity battery fully charges
in approximately seven hours.
Four Slot USB Cradle
This section describes how to use a Four Slot USB cradle with the mobile computer. For cradle communication
setup procedures refer to the MC50 Integrator Guide.
The Four Slot USB cradle:
•
Provides 12 VDC power for operating the mobile computer.
•
Enables data communication between the mobile computer (up to four) and a host computer, using a
USB connection.
•
Synchronizes information between the mobile computer and a host computer. (With customized or third
party software, it can also synchronize the mobile computer with corporate databases.)
•
Simultaneously charges up to four batteries in the mobile computer.
Table 3-1
Spare Battery LED Charging Indicators
Spare Battery LED
(on cradle) Indication
Off No spare battery in slot; spare battery not placed correctly; cradle is not
powered.
Solid Amber Spare battery is charging.
Flashing Amber Error in charging; check placement of spare battery.
Solid Green Spare battery is fully charged.
NOTE Use only a Motorola-approved power supply (p/n 50-14000-148) output rated 12 VDC and minimum
3.33A. The power supply is certified to EN60950 with SELV outputs. Use of alternative power supply will
invalidate any approval given to this device and may be dangerous.
HINWEIS Benutzen Sie nur eine von Motorola genehmigte Stromversorgung (Teilenr. 50-14000-148) mit einer
Ausgangsleistung von 12 V (Gleichstrom) und mindestens 3.33A. Die Stromversorgung ist nach
EN60950 für die Verwendung in SELV-Stromkreisen zertifiziert. Bei Verwendung eines anderen
Netzteils werden alle für das Gerät gewährten Genehmigungen außer Kraft gesetzt, und der Betrieb
kann gefährlich sein.