3 - 14 MC50 with Windows Mobile 5.0 User Guide

Battery Insertion and Removal
Insert the battery into the battery well with the charging contacts on the battery aligning with the charging pins
on the adapter, and gently press down on the battery to ensure proper contact.
To remove the battery, press the battery release and lift battery out of the well.
Figure 3-14
UBC Adapter
Battery Charging Indicators
To charge a spare battery using the UBC adapter, insert the spare battery. The spare battery begins charging.
The UBC’s charge LEDs show the status of the battery charging in the adapter. Table 3-3 shows battery
charging status indications. The standard battery fully charges in approximately 2.5 hours and the extended
capacity battery fully charges in approximately six hours.
Figure 3-15
UBC Adapter LEDs
READY
CHARGING or STANDBY or FAULT
(Green)
(Flashing Yellow)
(Solid Yellow) (Flashing Yellow)
POWER
READY
CHARGING or STANDBY or FAULT
(Green)
(Flashing Yellow)
(Solid Yellow) (Flashing Yellow)
UBC Adapter
Battery Release
Battery
Battery Well
POWER
READY
CHARGING or STANDBY or FAULT
(Green)
(Flashing Yellow)
(Solid Yellow) (Flashing Yellow)