4 - 4 MC50 with Windows Mobile 5.0 User Guide
If, after performing these checks, the mobile computer is still not reading symbols, contact the distributor or
Motorola.
When receiving
beamed data an out
of memory message
appears.
Not enough free
memory available
for receiving data.
The mobile computer requires at least twice the amount of
memory available as the data you are receiving. For example, to
receive a 30K application, the mobile computer must have at
least 60K free.
The mobile computer
does not accept scan
input.
Scanning
application is not
loaded.
Load a scanning application onto the mobile computer. See
System Administrator.
Unreadable bar
code. Ensure the symbol is not defaced.
Distance between
exit window and bar
code is incorrect.
Ensure the mobile computer is within proper scanning range.
Battery is low. If the scanner stops emitting a scan beam when you press the
scan button, check the battery level. When the battery is low, the
mobile computer shuts off before the mobile computer notifies
you of the low battery condition.
Note
: If the scanner is still not reading symbols, contact the
distributor or
Motorola
.
Table 4-1
Troubleshooting the Mobile Computer (Continued)
Problem Cause Solution