Note: 1. The CALL LOG symbol and display indicator only disappear after browsing through all the entries. 2. It is only possible to enter subscribers in the phone book who are not already entered.
Using the Telephone
Muting the Microphone
1. Press the 
key to switch the microphone on or off during a call.
Access a Call Waiting Line / Holding and transferring calls (PABX)
When on an external call, press 
key to access a Call Waiting Line when you hear the call waiting prompt signal. Press 
key again to toggle between the two calls.
When on an external call (PABX line)
1.Press 
key to put the call on hold.
2.Dial the number of the extension.
3. Press | key again if you would like to take back the call, or | to transfer |
the call. |
|
|
Note: If several handsets are registered on the base station and a call should be put on
hold or transferred, press the 
key instead of 
.
Teleconference and Intercom Call Transfering
After having received an external call, it is possible to include a second handset in the conversation
1.Press the 
key and enter the number of the corresponding handset (e.g. 2) which should be included in the call.
2.The external caller is kept on hold. As soon as handset 2 takes the call, press 
key to transfer the call to handset 2.
Or
3.The external caller is kept on hold. as soon as handset 2 takes the call, press and
hold 
key to activate the teleconference.
4.By pressing the 
key, any of the handsets can be disconnected from the teleconference and the other handset continues with the external call.
Entering a Dialing Pause (P)
If the MOTOROLA telephone is connected to a PBX system, it may be
necessary to insert a dialing pause. To do this, press the key after entering the relevant digit, e.g. 0, for an outside line (0P....). A 'P' appears in the display indicating
a pause. The pause can also be entered when programming numbers in the phone book.
Using the Telephone
21
22
