Handset Settings
Activating/Deactivating Call Timer
It is possible to display the duration of a call on the handset. The timer starts when the conversation begins.
1. | Press the | key as often as necessary until the HANDSET menu appears. |
| ||
2. | Press the |
| key. |
| |
3. | Press the | or | key to select the CALL TIMER submenu. | Settings | |
4. | Press the |
| key. | ||
5. | Use the | or | key to switch the call timer on or off. | ||
| |||||
6. | Press the |
| key to confirm the setting. |
| |
Default Settings |
|
| |||
The handsets can be reset to the default settings. In doing so, all the settings which | Handset | ||||
2. | Press the |
| key. | ||
you have changed are returned to their default values. The phone book entries are |
| ||||
retained. |
|
|
| ||
1. | Press the | key as often as necessary until the HANDSET menu appears. |
| ||
3. | Press the | or | key to select the DEFAULT. |
| |
4. | Press the |
| key. |
| |
5. | Press the |
| key to confirm input. |
| |
Note: The handset is reset to its default settings.
29
Registering Additional Handsets
Further handsets can be registered on the base station. They must support the GAP standard, however, it is possible that some of the handset functions will not be available.
1. Press the 
key as often as necessary until the HANDSET menu appears.
2. Press the 
key.
3. Press the 
or 
key to select the REGISTER submenu.
4. Press the 
key.
5. Press and hold the 
key on the base station until the acknowledgement signal is heard, then enter the PIN when requested. (Default setting = 0000)
6. Press the 
key.
Note: After the connection has been established, the name and number of the handset (the next available number if less than 4 are already registered) appear in the display.
30
