Actiontec electronic IS560LH Range 0−255 Default UnitsASCII, Range −32 Default Backspace Units

S1 Ring Counter

Range: 0−255

Default: 0

Units:rings

This register, Ring Counter, is read only. The value of S1 is incremented with each ring. If no rings occur over a six second interval, this register is cleared.

S2 AT Escape Character (user defined)

Range: 0−255

Default: 43

Units:ASCII

This register determines the ASCII valued used for an escape sequence. The default is the + character. The escape sequence allows the modem to exit data mode and enter command mode when on-line. Values greater than 127 disable the escape sequence.

S3	Command Line Termination Character (user defined)
Range:	0−127, ASCII decimal
Default:	13 (carriage return)
Units:	ASCII

This register determines the ASCII values as the carriage return character. This char- acter is used to end command lines and result codes.

S4	Response Formatting Character (user defined)
Range:	0−127, ASCII decimal
Default:	10 (line feed)
Units:	ASCII

This register determines the ASCII value used as the line feed character. The modem uses a line feed character in command mode when it responds to the computer.

S5	Command Line Editing Character (user defined)
Range:	0−32, 127
Default:	8 (backspace)
Units:	ASCII

This register sets the character recognized as a backspace and pertains to asynchro-

66