Actiontec electronic IS560LH Local Flow Control Selection, Error Control Mode Selection

\Nn Error Control Mode Selection

This command determines the type of error control used by the modem when send- ing or receiving data.

	Command		Effect
	\N0		Buffer mode. No error control (same as &Q6).
	\N1		Direct mode.
			MNP or disconnect mode. The modem attempts to
	\N2		connect in MNP 2-4 error control procedure. If this fails,
			the modem disconnects. This is also known as MNP
			reliable mode.
			V.42, MNP, or buffer (default). The modem attempts to
			connect in V.42 error control mode. If this fails, the
	\N3		modem attempts to connect in MNP mode. If this fails,
			the modem connects in buffer mode and continues
			operation. This is also known as V.42/ MNP auto
			reliable mode (same as &Q5).
			V.42 or disconnect. The modem attempts to connect in
	\N4		V.42 error control mode. If this fails, the call will be
			disconnected.
	\N5		V.42 MNP or buffer (same as \N3)
	\N7		V.42. MNP or buffer (same as \N3).
Result Codes:
	OK	n = 0, 1, 2, 3, 4, 5, 7
	ERROR	Otherwise
\Q		Local Flow Control Selection
	Command		Effect
	\Q0		Disable flow control. Same as &K0.
	\Q1		XON/XOFF software flow control. Same as &K4.
	\Q2		CTS-only flow control. This is not supported, and the
			response is ERROR.
	\Q3		RTS/CTS to DTE (default). Same as &K3.

58