Actiontec electronic IS560LH Automatic Disconnect Delay, DTMF Dialing Speed, Escape Guard Time

S10	Automatic Disconnect Delay
Range:	1-254
Default:	20
Units:	0.1 seconds

This register sets the length of time, in tenths of a second, that the modem waits before hanging up after a loss of carrier. This allows for a temporary carrier loss without causing the local modem to disconnect. The actual interval the modem waits before disconnecting is the value in register S10.

S11	DTMF Dialing Speed
Range:	50-150
Default:	95
Units:	0.001 seconds

This register determines the dialing speed which is prefixed for each country.

S12	Escape Guard Time
Range:	0-255
Default:	50
Units:	0.02 seconds

This register sets the value (in 20 ms increments) for the required pause after the escape sequence (default 1s).

S14 General Bit Mapped Options Status

Indicates the status of command options. Only bit 2 and bit 5 are used, read only.

Bit 3 Result codes (Vn) 0 = Numeric (V0)

1 = Verbose (Vl) (Default)

Bit 6 Pulse dial PPS selection (&Pn)

0 = 10 PPS (&p0, &p1) (Default)

1 = 20 PPS (&p2)

Default: 8 (00001000b)

68