
8.Press [Can] to return to the System Parameters menu, and then select Setup Port. Select the port to setup, and select the correct baud rate, data bits, stop bits, and parity.
9.After all the settings are updated, the terminal will update the system parameter setting, when you exit the extended menu, the terminal will reset.
12.3Default Setup Configuration
Configuration | Default Value |
IBMEFT/NCR protocol selection | IBMEFT |
|
|
Download Port Number | Com1 |
|
|
Download Port Type | RS232 |
|
|
RS232 baud rate | 19200 |
|
|
RS232 data bits | 8 |
|
|
RS232 parity | No parity |
|
|
RS232 stop bits | 1 |
|
|
12.4Error: Bad Prog.
The flash memory in the terminal may not match the flash memory requirement of EFTL file. Contact your account manager to arrange to have the terminal sent in for repair.
12.5Device already loaded with program x and
parameter y
This error message displays on the computer or cash register if the Ingenico 6500 has already been upgraded.
12.6CRC Error
The CRC Error message, followed by multiple characters in a string, displays on the Ingenico 6500 to indicate that the Security Module has been compromised. Notate error to report with issue. Notify your Ingenico Project Manager immediately and request RMA number authorization to return unit to an authorized repair facility for recovery.
Ingenico 6500 User’s Guide | 115 |