Ingenico 6500 manual Setting the Response Timeout, Response TMO

6.4.8Setting the Response Timeout

This option sets the amount of time after which the port should cease waiting for a response, in units of 1/100 of a second.

Display	Action
	To access the extended menu, restart the terminal
	by pressing [1] + [CAN] + [OK]; while the terminal
	is starting up, access the extended menu by
	pressing the [1] and [3] keys simultaneously.
Extended Menu	Press [	], [	], [	], [Enter] to select Supervisor
Serialnum Inject	Menu.
System Config
System Info
Supervisor Menu
Enter Password:	Key password [2] [6] [3] [4], then press [Enter].
Supervisor Menu	Press [	], [	], [	], [Enter] to select Sys
Change Password	Parameters.
Application File
Security
Sys Parameters
Sys Parameters	Press [	], [	], [Enter] to select Setup Port.
Download Method
Download Port
Setup Port
Setup Port	Select Port1, Port2, or Port3.
Port1
	(By default, Port 1 = Host, Port 2 = Aux, Port 3 =
Port2
	E-NET port - Ethernet.)
Port3
Port X	Press [	] six times, and then press [Enter] to
Interface Type	select Response TMO (timeout).
Baud Rate
Data Bits
Stop Bits
Parity
LAN Address
Retry Count
Response TMO
Response TMO	Enter an amount of time after which the port
Old Value: 300	should cease waiting for a response, in units of
Enter New Value:	1/100 of a second.

44	Chapter 6 System Parameters Menu
	Section 6.4 Setting Up the Port