Testing the Keypad, Testing the Beeper | Ingenico 6500 specification

7.3Testing the Keypad

This allows you to test each key to ensure the proper value returns.

		Display					Action
							To access the extended menu, restart the terminal
							by pressing [1] + [CAN] + [OK]; while the terminal
							is starting up, access the extended menu by
							pressing the [1] and [3] keys simultaneously.
			Extended Menu				Press [	], [Enter] to select Diagnostic Menu.
		Serialnum Inject					Press [	], [Enter] to select Diagnostic Menu.
		Serialnum Inject
		System Config
		System Info
		Supervisor Menu

		Diagnostic Menu

			Diagnostic Menu				Press [	], [Enter] to select Keypad.
		Display					Press [	], [Enter] to select Keypad.
		Display

		Keypad

			Keypad				Press a key to test. (Here, we pressed 0).
		0	(0x30)				Press a key to test. (Here, we pressed 0).
		0	(0x30)				The key value and hexadecimal value stored in the
		To exit, press “CAN”					The key value and hexadecimal value stored in the
		To exit, press “CAN”					terminal’s memory returns. When finished, press
							[CAN].

7.4Testing the Beeper

This feature tests the beeper by sounding and displaying each possible beep type.

	Display				Action
					To access the extended menu, restart the terminal
					by pressing [1] + [CAN] + [OK]; while the terminal
					is starting up, access the extended menu by
					pressing the [1] and [3] keys simultaneously.
	Extended Menu				Press [	], [Enter] to select Diagnostic Menu.
	Serialnum Inject				Press [	], [Enter] to select Diagnostic Menu.
	Serialnum Inject
	System Config
	System Info
	Supervisor Menu

	Diagnostic Menu

	Diagnostic Menu				Press [	], [Enter] to select Beeper.
	Display				Press [	], [Enter] to select Beeper.
	Display
	Keypad

	Beeper

74	Chapter 7 Diagnostic Menu
	Section 7.3 Testing the Keypad

Image 82

Ingenico 6500 manual Testing the Keypad, Testing the Beeper

Contents

Ingenico Page Table of Contents Chapter Supervisor Menu Diagnostic Menu Chapter Secure Certificate 100 Revision History Page Payment Types IntroductionTwo Terminal Models Connectivity About this Manual Conventions Used in this Manual Kits JavaPOS Software Development Kit Unicapt 32 Software Development Kit Overview Accessing the Extended MenuExtended Menu Overview Navigating the Extended Menu Finding the Current Setting Finding Options in the Extended Menu Ibmeft Ncreft COM2Gems COM2 COM3 DhcpCOM1 COM2 COM3 USB SAM Extended Menu Overview Changing the Date and Time System Configuration MenuSystem Config YYYY/MM/DD Changing the Beep Tones Enable/Disable Beep TonesChanging the Display Contrast Display Contrast Beep Tone Status Changing the Beep LengthBeep Length Tone Changing the Beep TonesMidtone Turning the Backlight On or Off Setting Backlight to Off When IdleSystem Configuration Updating Backlight Turning the Backlight On or Off Idle Timeouts Idle TimeoutBacklight System Info System Info MenuFinding Version Numbers Versions Security Info Checking the Security InformationSecurity Info Xxxxxxxxx RAM Info RAM Info View Parameter Viewing All Parameter ValuesDisplayAction Ingnar Ibmeft OFFNone ETH Dhcp NONE/AUTO Auto Ingenico 6500 User’s Guide Changing the Supervisor Menu Password Supervisor Menu PasswordSupervisor Menu Reading the Application File Application File in TerminalSupervisor Menu Read Erasing the Application FileFile Menu Erase Setting the Key Injection Port Security Injecting Keys Setting the Key IndexInject Keys Setting the Application Number Index SelectX App SelectAAAA Finding the Key Check Value Terminal KeysApp Select Finding the Key Check Value Application Keys Application Keys Application KeysAPP1 APP2 Erase App Keys Erasing Application KeysErase App Keys Erase App Keys? System Parameters Injecting a Serial Number Sys Parameters Setting the Download MethodSystem Parameters Menu Download Method Download Port Selecting the Download PortDownload Port Port1 Selecting the Download Interface Type Setting Up the PortPortX Port Setting the Baud RateSetup Port Baud Rate Data Bits Setting the Data BitsData Bits Stop Bits Setting the Stop BitsSet Port Stop Bits Parity Setting the ParityParity LAN Address Defining the LAN AddressLAN Address Retry Count Setting the Retry CountRetry Count Response TMO Setting the Response TimeoutResponse TMO Poll TMO Setting the Poll TimeoutPoll TMO Turnaround TMO Setting the Turnaround TimeoutTurnaround TMO Port3 Defining the Dhcp AddressPort3 Local IP Defining the Local IP AddressLocal IP Local IP Port Setting the Local IP Port NumberLocal IP Port Defining the Server IP Address Server IP Setting the Server IP Port Number Server IP Port IP Add Mask Masking Your IP AddressXXX.XXX.XXX.XXX Gateway Setting the GatewayGateway Updating… Primary DNS Setting the Primary DNSPrimary DNS Secondary DNS Setting the Secondary DNSSecondary DNS Dial Setting the Domain NameSetting Up the Phone Number to Dial Dial Phone Num Setting Up the Modem Speed Modem Speed Changing the Position of the Host Port or Aux Port Host Port Aux Port Auto Detect Configuring the Host Port Auto Detect FeatureDisabling or Enabling the Auto Detect Feature AD On/Off AD Timeout Setting the Auto Detect TimeoutAD Timeout AD Retry Times Setting the Auto Detect Retry TimesAD Retry Times Editing Parameters Parameter Editor Parameter Name Description Value Data Parlcdcontrast Pareftllevelnum Rescommrecerror Parameter Name Resbdlcfsdwnerror PARCOM1BAUDRATE PARCOM1INTERFACET PARCOM2PARITY PARCOM3BAUDRATE Parethgateway Parapplcomment Diagnostic Menu Diagnostic MenuTesting the Display Contrast Diagnostic Menu Keypad Testing the KeypadTesting the Beeper Keypad RS232 Testing the RS232 ConnectionBeeper RS232 Testing the RS485 Tailgate Connection Tailgate Testing the USB Port USB Diagnostic Testing the Magnetic Stripe Reader Mag Stripe Reader Testing the Smart Card Reader Smart Card Reader Testing the SAMs Testing the Touch Screen Touch Screen Diagnostic Menu Press , Enter to select Signature Capture Testing Signature CaptureExtended Menu Press , Enter to select Diagnostic Menu Signature Capture Testing Pen Calibration Pen Calibration Testing Finger Calibration Finger Calibration SCV Verification Architecture System Architecture Host Connections Terminal Architecture Operating System Maintenance Application System and Security Application Transmitting Data DigitizerUser Application Download File Architecture Key Architecture Key Name Index Length Sponsor Key KTKTerminal Based Keys Description of Key Master Keys Application Based KeysSpecial Keys Key Name Description of Key Dukpt Keys Security OptionsSession Keys Wtpk Prompt MACing Prompts Authentication Key OptionsChange Terminal ID Option Possible Values Description Double-Length Key MAC Calculation Code MACingPossible Encryption Description Values Atalla Key Block Protection Option Visa PED Mode OptionTerminal Startup Verify MAC Option Financial Key Option Secure Certificate Secure CertificateSecuring Process Ingenico 6500 User’s Guide 101 Secure Certificate Descriptor Sections Secure Certificate MAC Descriptor Section Visa PED Mode Descriptor Section Possible Description Values Application Descriptor Section SHA1+MAC Secure File Descriptor Section 106 Non-Secure File Descriptor Section Applname filename.ext class existence Delete Data File Descriptor Section Delete Application Code File Descriptor SectionDelete Whole Application Descriptor Section Preparation Ibmeft DownloadPrerequisites Timing Outline of Download Process Steps Feedback Ingenico 6500 User’s Guide 111 112 Hardware settings in the Ingenico 6500 have been changed Download ErrorsError Opening Port Communications port is not working Received 3 NAKs or Timeout SendVISAPacket CRC Error Default Setup ConfigurationError Bad Prog Configuration Default Value Comm Receive Error Not Enough DFS Space Card Read Error1 IBM EFT TroubleshootingEFT Device Not Available EFT Device Not Available During Check Authorization