Editing Parameters, Parameter Editor | Ingenico 6500 manual

6.6Editing Parameters

This option allows you to edit NAR SSA parameters.

	Display				Action
					To access the extended menu, restart the terminal
					by pressing [1] + [CAN] + [OK]; while the terminal
					is starting up, access the extended menu by
					pressing the [1] and [3] keys simultaneously.
	Extended Menu				Press [	], [	], [	], [Enter] to select Supervisor
	Serialnum Inject				Menu.
	System Config
	System Info

	Supervisor Menu

	Enter Password:				Key password [2] [6] [3] [4], then press [Enter].
					Key password [2] [6] [3] [4], then press [Enter].

	Supervisor Menu				Press [	], [	], [	], [Enter] to select Sys
	Change Password				Parameters.
	Application File
	Security

	Sys Parameters

	Sys Parameters				Press [	] four times, and then press [Enter] to
	Download Method				select Parameter Editor.
	Download Port
	Setup Port
	Auto Detect

	Parameter Editor

	Parameter ID:				Enter the parameter ID (maximum three digits).
					Enter the parameter ID (maximum three digits).

	Updating

The following table lists the parameter ID numbers, descriptions, and values. This table is from the internal document, NAR SSA Library: Security Part, version 1.23.

The system parameter file is a public file that resides at the root directory of the terminal’s System & Security Application. This file records the system parameter settings made through the supervisor menu. The financial application is allowed to read from this file.

Each parameter occupies 16 bytes in the parameter file. A null terminator is required and saved for character strings, except when the string length is 16. In such case, only 16 bytes of data are saved.

62	Chapter 6 System Parameters Menu
	Section 6.6 Editing Parameters

Image 70

Ingenico 6500 manual Editing Parameters, Parameter Editor

Contents

Ingenico Page Table of Contents Chapter Supervisor Menu Diagnostic Menu Chapter Secure Certificate 100 Revision History Page Payment Types IntroductionTwo Terminal Models Connectivity About this Manual Conventions Used in this Manual Kits JavaPOS Software Development Kit Unicapt 32 Software Development Kit Overview Accessing the Extended MenuExtended Menu Overview Navigating the Extended Menu Finding the Current Setting Finding Options in the Extended Menu Ibmeft Ncreft COM2Gems COM2 COM3 DhcpCOM1 COM2 COM3 USB SAM Extended Menu Overview Changing the Date and Time System Configuration MenuSystem Config YYYY/MM/DD Changing the Beep Tones Enable/Disable Beep TonesChanging the Display Contrast Display Contrast Beep Tone Status Changing the Beep LengthBeep Length Tone Changing the Beep TonesMidtone Turning the Backlight On or Off Setting Backlight to Off When IdleSystem Configuration Updating Backlight Turning the Backlight On or Off Idle Timeouts Idle TimeoutBacklight System Info System Info MenuFinding Version Numbers Versions Security Info Checking the Security InformationSecurity Info Xxxxxxxxx RAM Info RAM Info View Parameter Viewing All Parameter ValuesDisplayAction Ingnar Ibmeft OFFNone ETH Dhcp NONE/AUTO Auto Ingenico 6500 User’s Guide Changing the Supervisor Menu Password Supervisor Menu PasswordSupervisor Menu Reading the Application File Application File in TerminalSupervisor Menu Read Erasing the Application FileFile Menu Erase Setting the Key Injection Port Security Injecting Keys Setting the Key IndexInject Keys Setting the Application Number Index SelectX App SelectAAAA Finding the Key Check Value Terminal KeysApp Select Finding the Key Check Value Application Keys Application Keys Application KeysAPP1 APP2 Erase App Keys Erasing Application KeysErase App Keys Erase App Keys? System Parameters Injecting a Serial Number Sys Parameters Setting the Download MethodSystem Parameters Menu Download Method Download Port Selecting the Download PortDownload Port Port1 Selecting the Download Interface Type Setting Up the PortPortX Port Setting the Baud RateSetup Port Baud Rate Data Bits Setting the Data BitsData Bits Stop Bits Setting the Stop BitsSet Port Stop Bits Parity Setting the ParityParity LAN Address Defining the LAN AddressLAN Address Retry Count Setting the Retry CountRetry Count Response TMO Setting the Response TimeoutResponse TMO Poll TMO Setting the Poll TimeoutPoll TMO Turnaround TMO Setting the Turnaround TimeoutTurnaround TMO Port3 Defining the Dhcp AddressPort3 Local IP Defining the Local IP AddressLocal IP Local IP Port Setting the Local IP Port NumberLocal IP Port Defining the Server IP Address Server IP Setting the Server IP Port Number Server IP Port IP Add Mask Masking Your IP AddressXXX.XXX.XXX.XXX Gateway Setting the GatewayGateway Updating… Primary DNS Setting the Primary DNSPrimary DNS Secondary DNS Setting the Secondary DNSSecondary DNS Dial Setting the Domain NameSetting Up the Phone Number to Dial Dial Phone Num Setting Up the Modem Speed Modem Speed Changing the Position of the Host Port or Aux Port Host Port Aux Port Auto Detect Configuring the Host Port Auto Detect FeatureDisabling or Enabling the Auto Detect Feature AD On/Off AD Timeout Setting the Auto Detect TimeoutAD Timeout AD Retry Times Setting the Auto Detect Retry TimesAD Retry Times Editing Parameters Parameter Editor Parameter Name Description Value Data Parlcdcontrast Pareftllevelnum Rescommrecerror Parameter Name Resbdlcfsdwnerror PARCOM1BAUDRATE PARCOM1INTERFACET PARCOM2PARITY PARCOM3BAUDRATE Parethgateway Parapplcomment Diagnostic Menu Diagnostic MenuTesting the Display Contrast Diagnostic Menu Keypad Testing the KeypadTesting the Beeper Keypad RS232 Testing the RS232 ConnectionBeeper RS232 Testing the RS485 Tailgate Connection Tailgate Testing the USB Port USB Diagnostic Testing the Magnetic Stripe Reader Mag Stripe Reader Testing the Smart Card Reader Smart Card Reader Testing the SAMs Testing the Touch Screen Touch Screen Diagnostic Menu Press , Enter to select Signature Capture Testing Signature CaptureExtended Menu Press , Enter to select Diagnostic Menu Signature Capture Testing Pen Calibration Pen Calibration Testing Finger Calibration Finger Calibration SCV Verification Architecture System Architecture Host Connections Terminal Architecture Operating System Maintenance Application System and Security Application Transmitting Data DigitizerUser Application Download File Architecture Key Architecture Key Name Index Length Sponsor Key KTKTerminal Based Keys Description of Key Master Keys Application Based KeysSpecial Keys Key Name Description of Key Dukpt Keys Security OptionsSession Keys Wtpk Prompt MACing Prompts Authentication Key OptionsChange Terminal ID Option Possible Values Description Double-Length Key MAC Calculation Code MACingPossible Encryption Description Values Atalla Key Block Protection Option Visa PED Mode OptionTerminal Startup Verify MAC Option Financial Key Option Secure Certificate Secure CertificateSecuring Process Ingenico 6500 User’s Guide 101 Secure Certificate Descriptor Sections Secure Certificate MAC Descriptor Section Visa PED Mode Descriptor Section Possible Description Values Application Descriptor Section SHA1+MAC Secure File Descriptor Section 106 Non-Secure File Descriptor Section Applname filename.ext class existence Delete Data File Descriptor Section Delete Application Code File Descriptor SectionDelete Whole Application Descriptor Section Preparation Ibmeft DownloadPrerequisites Timing Outline of Download Process Steps Feedback Ingenico 6500 User’s Guide 111 112 Hardware settings in the Ingenico 6500 have been changed Download ErrorsError Opening Port Communications port is not working Received 3 NAKs or Timeout SendVISAPacket CRC Error Default Setup ConfigurationError Bad Prog Configuration Default Value Comm Receive Error Not Enough DFS Space Card Read Error1 IBM EFT TroubleshootingEFT Device Not Available EFT Device Not Available During Check Authorization