Motorola ME4050 manual Base Station Settings, Barring Calls, Entering/Changing Emergency Number

Base Station Settings

32

Barring Calls

The following options are available for selection for barring calls:
Option		Description
DISABLE		All telephone calls are possible.
EXTERNAL		All external calls are barred.			Settings
NUMBER		Define a number which should be barred, e.g. 0190.
1.	Press the	key as often as necessary until the BASE menu appears.
2.	Press the		key.
3.	Press the	or	as often as necessary to select the BARRING submenu.
4.	Press the		key.		Station
8.	Press the		key.
5.	Enter 0000. Note: (Factory setting is 0000).
6.	Press the		key.
7.	Use the	or	key to select the handset which should be barred.
9.	Use the	or	key to select DISABLE or EXTERNAL.		Base
	Or
10. Use the		or	key to select NUMBER and press the	, then input
	the number(up to 5 digits) which you want to barred.
11. Press the			key.

Entering/Changing Emergency Number

Emergency numbers are free of any restrictions, i.e. they can still be called even if

barring of any kind is set.31 Note: It is impossible to make emergency calls when the keypad lock is enabled.

Before emergency numbers can be used, they must be stored. The emergency numbers can then be dialed manually or from the phone book if they are stored there.

Two different emergency numbers (maximum of five digits) can be programmed.

Example: Three-digit emergency number = 123. All numbers which begin with 123 are dialed even if the unit is only programmed for internal calls.

1.	Press the	key as often as necessary until the BASE menu appears.
2.	Press the		key.
3.	Press the	or	as often as necessary to select the EMERGENCY submenu.
4.	Press the		key.
5.	Enter the PIN. Note: (Factory setting is 0000).

Note: It is recommended to enter emergency numbers in the phone book and to assign significant names (e.g. "DOC","FIRE").

6.	Press the	key.
7.	Use the or	key to select the emergency number to be changed and change it.
8.	Press the	key.

Changing the Flash Time

1.	Press the	key as often as necessary until the BASE menu appears.
2.	Press the		key.
3.	Press the	or	as often as necessary to select the FLASH TIME submenu.
4.	Press the		key.
5.	Press the	or	key to select the required flash time.
6.	Press the		key.