Motorola MVME956AC, MVME956UM2 user manual Backplane Preparation

Backplane Preparation

Backplane Preparation

The chassis is shipped from the factory with the backplane fully equipped with sockets (VME64X bus connectors), power connectors, and bus terminator resistor networks. No special preparation or preassembly is required prior to use.

You must configure the VME64X bus daisy-chain jumpers on the rear (wire side) of the backplane. Refer to VITA 1.x Live Insertion for VME64x requirements standard for more electrical detail and information on daisy- chain jumpering.

4

Note Backplane daisy-chain jumpers normally are shipped with the chassis. If necessary, additional jumpers can be ordered from Motorola.

http://www.mcg.mot.com/literature 4-3