Safety Summary

The following general safety precautions must be observed during all phases of operation, service, and repair of this equipment. Failure to comply with these precautions or with specific warnings elsewhere in this manual could result in personal injury or damage to the equipment.

The safety precautions listed below represent warnings of certain dangers of which Motorola is aware. You, as the user of the product, should follow these warnings and all other safety precautions necessary for the safe operation of the equipment in your operating environment.

Ground the Instrument.

To minimize shock hazard, the equipment chassis and enclosure must be connected to an electrical ground. If the equipment is supplied with a three-conductor AC power cable, the power cable must be plugged into an approved three-contact electrical outlet, with the grounding wire (green/yellow) reliably connected to an electrical ground (safety ground) at the power outlet. The power jack and mating plug of the power cable meet International Electrotechnical Commission (IEC) safety standards and local electrical regulatory codes.

Do Not Operate in an Explosive Atmosphere.

Do not operate the equipment in any explosive atmosphere such as in the presence of flammable gases or fumes. Operation of any electrical equipment in such an environment could result in an explosion and cause injury or damage.

Keep Away From Live Circuits Inside the Equipment.

Operating personnel must not remove equipment covers. Only Factory Authorized Service Personnel or other qualified service personnel may remove equipment covers for internal subassembly or component replacement or any internal adjustment. Service personnel should not replace components with power cable connected. Under certain conditions, dangerous voltages may exist even with the power cable removed. To avoid injuries, such personnel should always disconnect power and discharge circuits before touching components.

Use Caution When Exposing or Handling a CRT.

Breakage of a Cathode-Ray Tube (CRT) causes a high-velocity scattering of glass fragments (implosion). To prevent CRT implosion, do not handle the CRT and avoid rough handling or jarring of the equipment. Handling of a CRT should be done only by qualified service personnel using approved safety mask and gloves.

Do Not Substitute Parts or Modify Equipment.

Do not install substitute parts or perform any unauthorized modification of the equipment. Contact your local Motorola representative for service and repair to ensure that all safety features are maintained.

Observe Warnings in Manual.

Warnings, such as the example below, precede potentially dangerous procedures throughout this manual. Instructions contained in the warnings must be followed. You should also employ all other safety precautions which you deem necessary for the operation of the equipment in your operating environment.

Page 2 Page 4
Page 3
Image 3
Motorola PrPMC800/800ET Processor PMC Module manual Ground the Instrument, Do Not Operate in an Explosive Atmosphere
Page 2 Page 4

PRPMC800A/IH5, PrPMC800/800ET Processor PMC Module specifications

The Motorola PrPMC800/800ET Processor PMC Module, specifically the PRPMC800A/IH5 variant, represents a significant advancement in embedded processing technology. Often utilized in telecommunications, aerospace, and defense applications, this PMC module is designed to provide robust performance in demanding environments, making it suitable for high-speed data processing and communication tasks.

At the core of the PrPMC800 module is the PowerPC 750 architecture, known for its efficiency and power management capabilities. This 32-bit RISC processor is clocked at speeds reaching up to 800 MHz, allowing it to handle complex computations and multitasking scenarios effectively. The processor architecture supports a variety of software environments, including real-time operating systems and VxWorks, which enhances its adaptability across diverse applications.

One of the standout features of the PRPMC800A/IH5 module is its memory capacity. The module supports up to 1 GB of SDRAM, offering ample space for processing large datasets and executing multiple applications simultaneously. Furthermore, the integrated PCI bus facilitates high-speed connectivity with other modules and components in the system, ensuring rapid data transfer rates essential for real-time processing tasks.

An important characteristic of the PrPMC800 module is its thermal and environmental resilience. Designed with military-grade standards, it operates reliably in extreme conditions, including high temperatures and vibrations. This makes it particularly suitable for rugged applications where standard commercial-grade processors may fail.

The module also incorporates advanced I/O capabilities, featuring dual Gigabit Ethernet ports which enhance networking performance. Additional serial ports and interrupt handling further improve the module's versatility, allowing it to interface seamlessly with various peripheral devices and systems.

In summary, the Motorola PrPMC800/800ET Processor PMC Module, represented by the PRPMC800A/IH5 model, is an exemplary solution for applications requiring high performance, reliability, and adaptability. With its powerful PowerPC architecture, generous memory capacity, robust I/O capabilities, and proven ruggedness, this processor module stands out as a preferred choice for engineers and developers working in critical industries.
Top Page Image Contents