Motorola USBW 200 System Requirements, Products Covered by this Guide, Installation, Windows XP

System Requirements

Following are the minimum system requirements for support of the USBw 200-series USB WiMAX Adaptor

	Windows XP	Windows Vista	Windows 7
OS Level	SP2 (SP3 recommended)	All	All
Processor Speed	500 MHz	1.0 GHz	1.0 GHz
Disk Space	40 MB	40 MB	40 MB
RAM requirement	512 MB	1.0 GB	1.0 GB

Products Covered by this Guide

USBw25200 - 2500-2700 MHz band

USBw35200 - 3400-3600 MHz band

Installation

The USBw 200 is a fully Plug & Play USB device, with all operating software pre-loaded on the USB device itself; no CD-ROM is required. When first plugged in, it installs all the necessary software on your computer to provide high-speed Internet service using the latest WiMAX technology. You may install the software on more than one computer, activating the WiMAX service on the computer of your choice by plugging in the USBw 200.

Insert the USBw 200 into your laptop computer’s USB port.

Windows XP: If setup does not automatically

start: click “Start” and choose “Run”. Type “X:\InstVerif.exe” (where X is the USB drive designation) and click “OK”.

Windows Vista and 7: If setup does not

automatically start: click “Start” and choose “Computer”, right click on “USB drive” or “CD drive” and choose “Open Auto Play”. Select “InstVerif.exe”

USBw 200 User Guide	6814927F14
Issue 1.0	Revision Date: 7/28/2010
	-3 -