PROGRAMMING FEATURES
PROGRAMMING MICROPHONE
ACCESSORY GAIN LEVEL
To configure the Accessory Microphone Gain Level, enter ’Programming Mode’ and scroll through the programming options by short pressing the PTT button.
MIC |
The current accessory microphone gain level setting will be blinking. You can select the desired gain level (1=Low gain,2= Medium
gain or 3= High gain) by pressing the 
/
buttons. Once you have selected the gain level you want to program, long press the PTT button to exit and save or short press the PTT button to move to the next programming feature without saving.
Note: The values available for accessory microphone gain level are dependent upon maximum levels the radio supports.
PROGRAMMING SCAN LIST
You can enable/disable the Channel Scanning feature for each one of the channels in your radio. To do so, enter ’Programming Mode’ and select the channel you want to program. Scroll through the programming options by short pressing the PTT button until you reach the ‘Scan Programming Mode’. The radio display
will show the scan icon 
as follows:
YES |
Both the channel number and current scan setting (YES=ON or NO=OFF) will be blinking
English 44
