![](/images/new-backgrounds/1236682/23668283x1.webp)
MENU to scroll through the options until you reach the ‘Code Programming Mode’. The radio display will show the blinking CTCSS/ DPL code as follows:.
MENU to scroll through the options until you reach the ‘Bandwidth Programming Mode’. The radio display will show the current bandwidth setting as follows:
PROGRAMMING FEATURES
RX |
To program the desired code, scroll up/down
with the /
buttons until you get the CTCSS/DPL code value you want to set up. Long press the PTT button to exit and save.
PROGRAMMING RX (RECEPTION) BANDWIDTH
Some frequencies have selectable channel spacing, which must match other radios for optimum audio quality.
Once you have chosen the channel you want to program, short press the PTT button or
RX BW ![](/images/new-backgrounds/1236682/23668283xi4.webp)
To program the desired bandwidth (HI =
25Khz, LOW = 12.5 Khz), use the /
buttons until to select the value. Long press the PTT button to exit and save or short press the PTT button to move to the next programming feature without saving.
Note: If the value of the bandwidth cannot be changed, the display setting remain solid.
English 40