Mountfield 4155 H 4WD, 4135H, 4155H Areas of USE, Starting and Operation, Filling with petrol 18Q

ENGLISHEN

5.4.8 Clutch release lever

A lever for disengaging the variable transmission.

6 AREAS OF USE

HST is equipped with a lever, connected to the rear axle. See (16:N).

4WD is equipped with two levers, connected to the rear axle (17:O) and the front axle (17:P).

The disengagement lever must never be between the outer and inner positions. This overheats and damages the trans- mission.

The levers enable the machine to be moved by hand without the help of the engine. Two positions:

1.Lever in the inner position – transmission engaged for normal operation.

2.Lever in the outer position – transmission disengaged. The machine can be moved by hand.

The machine may not be towed over long distances or at high speeds. The transmission could be dam- aged.

The machine must not be operated with the forward most lever in the outer po- sition. Risk of damage and oil leakage in the front axle.

5.4.9 Seat (14:I)

The machine may only be used for the following tasks using the genuine GGP accessories stated.

Operation	Accessories, GGP original
Mowing	With cutting deck 95 C (all).
	With cutting deck 105 C (only
	4155 H).
Snow clearance	With snow blade. Snow chains
	and frame weights recommend-
	ed.
Grass clipping and	With towed collector 30" or 42".
leaf collection
Grass and leaf	With dump cart Pro or Combi.
transport

The maximum vertical load on the towing hitch must not exceed 100 N.

The maximum over-run load on the towing hitch from towed accessories must not exceed 500 N. NOTE! Before using a trailer – contact your insur- ance company.

NOTE! This machine is not intended to be driven on public roads.

7 STARTING AND OPERATION

The seat can be folded and is adjustable front-rear. The seat is locked in the folded up position using the catch (14:K) and ad- justed front-rear using the knobs (14:J).

The seat is equipped with a safety switch that is connected to the machine’s safety system. This means that certain dangerous activities are not pos- sible when there is nobody in the seat.

5.4.10 Engine casing (15:L)

To access the fuel cock, battery and engine the engine is equipped with engine casing that can be opened. The engine casing is locked by a rubber strap.

The engine casing is opened as follows:

1.Detach the rubber strap (15:M) at the front edge of the engine casing.

2.Carefully lift the engine casing back.

Close in reverse order.

The machine may not be operated un- less the engine casing is folded down and locked. Risk of burns and crushing injuries.

The machine may not be operated un- less the engine casing is closed and locked. Risk of burns and crushing in- juries.

7.1Filling with petrol (18:Q)

Always use lead-free petrol. You must never use 2- stroke petrol mixed with oil.

The tank holds 6 litres. The level can easily be read through the transparent tank.

NOTE! Ordinary lead-free petrol is a perishable and must not be stored for more than 30 days. Environmental petrol can be used, i.e. alkylate petrol. This type of petrol has a composition that is less harmful for people and nature.

Petrol is highly inflammable. Always store fuel in containers that are made especially for this purpose.

Only fill or top up with petrol outdoors, and never smoke when filling or top- ping up. Fill up with fuel before starting the engine. Never remove the filler cap or fill with petrol while the engine is running or still warm.

13