Moxa Technologies EM-1240-LX user manual Configuring the Ethernet Interface

EM-1240-LX User’s Manual Getting Started

Configuring the Ethernet Interface

In this section, we use the serial console to explain how to modify the EM-1240-LX’s network settings.

1.Change directories by issuing the command cd /etc.

2.Type the command vi rc to use the VI Editor to edit the configuration file. The IP addresses for the EM-1240-LX’s LAN1 and LAN2 are given as

ifconfig eth0 192.168.3.127 ifconfig eth1 192.168.4.127

as shown in the following figure. Edit these two lines to modify the static IP addresses.

2-4