Moyer Diebel MH-60M5, MH-6NM5 Electrical Connections Cont, Installation, Hinged Control Panel

INSTALLATION

Electrical Connections (Cont.)

Refer to Fig. 3

3. Remove (2) lower screws from the front panel of the machine to expose the electri- cal controls. Remove (2) screws on the control panel support. Swing the hinged control panel forward.

Figure 3

Hinged Control Panel

Refer to Fig. 4

4.Three phase or single phase incoming power wiring connections are made at the bottom of the machine’s main terminal block. The main terminal block is located on the side of the front right post of the dishwasher.

Electrical Power Connection

Figure 4

Main Terminal Block

6