Moyer Diebel MH-60M5, MH-6NM5, MH-6LM5 Initial Start-Up Cont, Check Wash Water Temperature

INITIAL START-UP

INITIAL START-UP (CONT.)

3

THE POWER SWITCH IS

ON DURING INITIAL FILL.

Make sure the doors are fully closed.

Push the On/Off power switch to the

UP position.

THE DISHWASHER FILLS

AUTOMATICALLY.

NOTE:

The dishwasher will fill automatically each time the power is turned off even if the dishwasher is full of water.

4

Note that the power indicator light is illuminated.

5

Check Wash

Water Temperature

The wash tank heater and the (booster tank heater, MH-60 only) will begin to heat the water in the dishwasher.

Wait approximately 10 minutes for the wash tank water to reach operating temperature. The temperature should be a minimum

of 150°F/66°C for (MH-60, MH-6N). The MH-6L requires a minimum of 120°F/49°C. However, a minimum of 140°F/60°C is optimum for the MH-6L.

Prescrap the dishes. Load ware into the dishrack. Open the doors, insert the rack into the dishwasher.

POWER

OFF

WASH

POWER

OFF

WASH

POWER

OFF

WASH

EXTENDED WASH

CYCLE

RINSE PRESSURE

EXTENDED WASH

CYCLE

RINSE PRESSURE

EXTENDED WASH

CYCLE

RINSE PRESSURE

12