Moyer Diebel MH-6LM5 Initial Start-Up, Complete the installation, Install the Scrap Screens

INITIAL START-UP

INITIAL START-UP

Complete the installation

After plumbing and electrical connections are made, follow the steps below to complete the installation of your dishwasher.

1.Remove the white protective covering from the exterior of the machine.

2.Remove any foreign material from inside the machine.

3.Make sure dishwasher power switch is off.

4.Turn main water supply on.

5.Turn main power on at the main power service disconnect switch.

1
Install the Scrap Screens
and Drain-Overflow Assembly
Install scrap screens.
Make sure rubber stopper is secure on the
drain-overflow assembly.
Make sure the drain-overflow
seats securely in the tank bottom.
MAKE SURE DOORS
ARE FULLY CLOSED.
2			POWER	B	EXTENDED WASH
					CYCLE
The controls are located		A			D
on the front of the dishwasher.
A-	On/Off power switch		OFF
B-	Power indicator Light		WASH	C	RINSE PRESSURE
C-	In-cycle light
D- Extended wash switch
E- Wash water temperature gauge
F- Final rinse pressure gauge
		E			F
					11