Moyer Diebel MH-6NM5, MH-6LM5 305mm, INSTALLATION Cont, Plumbing Connections, Water Connections

INSTALLATION

INSTALLATION (Cont.)
Plumbing Connections
NOTE:
Plumbing connections must comply
with all applicable sanitary and
plumbing codes.
Water Connections	12"
	[305mm]
1. All MH series dishwashers require
a single, hot water supply.	FLOOR
The hot water connection to all MH
series dishwashers is 3/4" NPT.
The connection is made from
underneath the dishwasher.

The following minimum water temperatures are recommended:

MH-60 with built-in 40° rise electric booster (Minimum 140°F/60°C) (Min./Max. flow pressure

20-22 PSI/138-151.8 kPa)

Figure 5

Hot Water Connection

(MH-60 Only)

3/4" NPT

MH-60 with built-in 70° rise electric booster (Minimum 110°F/43°C) (Min./Max. flow pressure

20-22 PSI/138-151.8 kPa)

MH-6N without built-in booster (Minimum 180°F/70°C) (Min./Max. flow pressure

20-22 PSI/138-151.8 kPa)

MH-6L low temperature (Minimum 120°F/49°C- 140°F/60°C Optimum)

(Min./Max. flow pressure 20-22 PSI/138-151.8 kPa)

Refer to Figs. 5 and 6

12"

[305mm]

FLOOR

Figure 8

Hot Water Connection

(MH-6N, MH-6L Only)

3/4" NPT

7