MSI Big Bang-XPower II manual Xxxx-Xxxxxxxx

Intel RAID

■Reset Disks to Non-RAID

Select option 3 Reset Disks to Non-RAID and press <Enter> to delete the RAID volume and remove any RAID structures from the drives. The following screen appears:

[

MAIN MENU

]

1.

Create RAID Volume

3.

Reset Disks to Non-RAID

2.

Delete RAID Volume

[ RESET RAID DATA ]

Recovery Volume Options

Resetting RAID disk will5. removeExit its RAID structures

and revert [it DISKto a /nonVOLUME-RAIDINFORMATIONdisk.

]

RAID Volumes :

None

defined.WARNING : Resetting a disk causes all data on the disk to be lost.

(This does not apply to Recovery volumes)

Port Drive

Model

Serial #

Size

Status

Physical

Devices :

Port

1

XXXX-XXXXXXXX

XXXXXXXXXXXXXX

XXX.XGB

Member Disk

ID)

1

2

XXXX-XXXXXXXX

XXXXXXXXXXXXXX

XXX.XGB

Member Disk

XXXX-XXXXXXXX

XXXXXXXXXXXXXX

XXX.XGB

Non-RAID Disk

2

XXXX-XXXXXXXX

XXXXXXXXXXXXXX

XXX.XGB

Non-RAID Disk

Select

the disks that

should be

reset.

[ ↑↓] - Previous/ Next

[SPACE] - Selects

[ENTER] - Selection Complete

[ ↑↓] - Select

[ESC] - Exit

[ENTER] - Select Menu

Use the <Space> key to select the disks and press <Enter> key. A confirmation sen- tence will appear below, and then press <Y> key to accept the selection.

Important

•You will lose all data on the RAID drives and any internal RAID structures when you perform this operation.

•Possible reasons to “Reset Disks to Non-RAID” could include issues such as incom- patible RAID configurations or a failed volume or failed disk.

B-8