MTD 12212, 12211 owner manual Battery Bracket

Models 12211 and 12212	PARTS LIST
	ELECTRIC START ASSEMBLY

REF.	PART
No.	No.	DESCRIPTION	QTY.
1	96512	Battery, 12 Volt, 9 Amp (Incl.
		Ref. 7)	1
2	9462	Battery Cap (yellow)	A/R
2A	9248	Battery Cap (white)	A/R
3	9009	Vent Tube	1
4	1475	Shield, Vent Tube (hard plastic)	1
5	9224	Clamp	1
6	9552	Hex Flange Screw, Self-Threading,
		1/4-20 x 1/2*	3
7	11361	Battery Hardware Kit – Includes two
		M6 x 11mm Bolts and two M6
		Nuts (metric sizes)	1

81908112 Ignition Switch (Incl. two ignition keys [Ref. 11], one lockwasher and one

		nut (lockwasher and nut not
		available separately)	1
9	1904570	Battery Hold-Down Clamp/Switch
		Mounting Plate Assy. (Incl. Ref.10)	1
10	1904548	Decal, Ignition Switch	1
11	96520	Ignition Key (pair)	1
12	96509	Battery Cable	2
13	96510	Cable (solenoid to starter motor)	1

141908118 Wire Harness Assy. (available as complete assembly only). Incl. wire assy. w/connector to large solenoid stud (red wire); wire assy. w/connector to small solenoid stud (red wire); wire assy. w/connector to solenoid

grounding screw (red wire); wire
assy w/connector to engine ground
shut-off (green wire); plastic
protector tube; wire terminal	1

REF.	PART
No.	No.	DESCRIPTION	QTY.
15	97020	Boot, Insulating	2
16	96514	Solenoid (Incl. nuts and washers
		for cables and wires)	1
17	1918831001	Battery Bracket	1
18	1186023	Round Hd. Screw, Square Neck,
		1/4-20 x 1-1/4	2
19	1186331	Hex Flange Screw, 5/16-18 x 1*	2
20	1177548	Lockwasher, External Tooth	2
21	1186389	Hex Locknut, 1/4-20	2
22	1100242	Lockwasher, 5/16	2
23	1186211	Hex Nut, 5/16-24	2
24	9853	Hex Locknut, #10-32	1
25	--	Lockwasher, #10 (not available
		from factory)	1
26	--	Hex Nut, #10-24 (not available
		from factory)	1
27	1901894	Recharge Wire Assembly	1
28	9218	Clip (holds recharging line)	1
29	9265	Plastic Wire Tie	1
30	9202	Plastic Wire Tie	1
31	1901202	Cable (ground wire to starter
		motor bracket)	1
32	1917262	Ground Wire Assy. (shut off)	1

*Specify GRADE 5 if ordering part locally. A/R - As Required

43