MTD 12212, 12211 owner manual Bolo TINES, Wheels, Thicker than standard tines

PARTS LIST

Models 12211 and 12212

BOLO TINES, WHEELS

13NOTE 1: Custom Tilling Tines are

13	available for your tiller. These are
	special hard-faced tines that are
	thicker than standard tines.

IMPORTANT: Left and right sides of tiller are determined by standing in operator position and facing direc- tion of forward travel.

REF.	PART
No.	No.	DESCRIPTION	QTY.
1	1100043	Hex Hd. Screw, 3/8-16 x 1-1/4*	16

21270-2A Bolo Tine-single. Right hand tine used on left side of tiller. (Incl.

		two ea. Refs. 1 and 3)	8
3	1733398	Hex Locknut, 3/8-16	18
5	1982612	Hex Hd. Screw, 3/8-16 x 2, Grade 8 ....	2

71270-1A Bolo Tine-single. Left hand tine used on right side of tiller. (Incl.

	two ea. Refs. 1 and 3)	8
8	1902154010 Tine Holder. For left and right sides ....	2

--1901118 Bolo Tine Replacement Set (Incl. eight ea. right hand and left hand tines,

REF.	PART
No.	No.	DESCRIPTION	QTY.
		and sixteen ea. Refs. 1 and 3)	1
--	2475-1	Custom Tilling Bolo Tine, Left hand
		tine (see Note 1 above)	8
--	2475-2	Custom Tilling Bolo Tine, Right hand
		tine (see Note 1 above)	8
--	10802	Custom Tilling Bolo Tine Replacement
		Set (Incl. eight ea. right hand and
		left hand custom tines, and sixteen
		each of Refs. 1 and 3)	1
11	9380	Clevis Pin, .312 x 1-3/4	2
12	9338	Hitch Pin	2
13	1917487	Wheel and Tire Assembly	2

* Specify GRADE 5 if ordering part locally.

41