Auger Control
The auger control is located on the left handle. Squeeze the auger control against the handle to engage the augers and start snow throwing action. Release to stop.
2 Way Chute Control (optional)
This
distance of snow discharge from the chute. Tilt the lever forward or rearward to adjust the distance snow will be
thrown.
Chute Directional Control (optional)
CHUTE DIRECTIONAL CONTROL
COMMANDE D'ORIENTATION DE LA GOULOTTE
Drive Control
The drive control is located on the right handle. Squeeze the drive control against the handle to engage the wheel drive. Release to stop.
4 Way Chute Control (optional)
This
chute. Press the button on the knob and pivot it left or right to rotate the chute to the direction that snow will be
thrown. Tilt the lever forward or rearward to adjust the distance snow will be thrown.
Chute
Control Lever
The chute directional control is located on left side of the snow thrower.
To change the direction in which snow is thrown, turn chute directional control as follows:
•Crank clockwise to discharge to the left.
•Crank counterclockwise to discharge to the right.
Clean-Out Tool
WARNING: Never use your hands to clear a clogged chute assembly. Shut off engine and remain behind handles until all moving
The tool is designed to clear a clogged chute assembly. Refer to Operating Your Snow Thrower section for more detailed information regarding the chute
Skid Shoes
The space between the shave plate and the ground can be adjusted by moving the skid shoes.
For close snow removal and hard packed snow, place skid shoes in the lowest position. Use middle or high position when area to be cleared is uneven or gravel surface.
Make certain the entire bottom surface of the skid shoe is against the ground to avoid uneven wear on the slide shoes.
Recoil Starter Handle
The recoil starter handle is used to manually start the engine.
Electric Starter Button (If so equipped)
Pressing the electric starter button engages the engine’s electric starter when plugged into a 120V power source.
9
