Zebra Technologies Z6Mplus manual Clean the Sensors, Cleaning the Sensors

Routine Care and Adjustments

Cleaning Procedures

Clean the Sensors

Brush or vacuum any accumulated paper lint and dust away from the printer sensors. Refer to Figure 35. The reflective sensor, transmissive sensor, and ribbon sensor should be cleaned on a regular basis to ensure proper operation of the printer. For printers with the peel-off, liner take-up, and/or rewind option(s) installed, clean the take label sensor as well.

Figure 35 • Cleaning the Sensors

4	1
	2
3

1Transmissive Sensor

2Reflective Sensor

3Ribbon Sensor

4Take-Label Sensor

13163L Rev. 3 5/20/2004 Z4Mplus/Z6Mplus User Guide 79