Zebra Technologies Z6Mplus manual Cancel Self Test

Troubleshooting

Printer Diagnostics

CANCEL Self Test

This self test prints a listing of the configuration parameters currently stored in the printer’s memory. See Figure 40. Depending on the options ordered, your label may look different.

Figure 40 • Sample Configuration Labels

The configuration shown on the label may be changed either temporarily (for specific label formats or ribbon and label stock) or permanently (by saving the new parameters in memory). See Basic Configuration on page 53 for further information about the configuration procedure.

To perform the CANCEL Self Test, complete these steps:

1.Turn the printer Off (O).

2.Press and hold CANCEL while turning On (l) the printer.

3.Release CANCEL after the DATA light turns off (approximately five seconds).

96 Z4Mplus/Z6Mplus User Guide 13163L Rev. 3 5/20/2004