Zebra Technologies manual Z4Mplus and Z6Mplus Media Specifications

Specifications

Media Specifications

Media Specifications

Table 21 • Z4Mplus and Z6Mplus Media Specifications

Media Specifications			Z4Mplus		Z6Mplus
Label length	Minimum	Tear-off	0.5 in.	13 mm	0.5 in.	13 mm
		Peel-off	1 in.	25.4 mm	1 in.	25.4 mm
		Rewind	0.5 in.	13 mm	0.5 in.	13 mm
		Cutter	1 in.	25.4 mm	1.5 in.	38.1 mm
	Maximum		39 in.	991 mm	39 in.	991 mm
Label width	Minimum		1 in.	25.4 mm	2 in.	51 mm
	Maximum	Tear/Cutter	4.5 in.	114 mm	7.0 in.	178 mm
		Peel/Rewind	4.25 in.	108 mm	6.75 in.	171 mm
Total thickness		Minimum	0.0023 in.	0.058 mm	0.0023 in.	0.058 mm
(includes liner, if any)
		Maximum	0.010 in.	0.25 mm	0.010 in.	0.25 mm
Core size			3 in.	76 mm	3 in.	76 mm
Maximum roll diameter			8 in.	203 mm	8 in.	203 mm
Inter-label gap		Minimum	0.079 in.	2 mm	0.079 in.	2 mm
		Preferred	0.118 in.	3 mm	0.118 in.	3 mm
		Maximum	0.157 in.	4 mm	0.157 in.	4 mm
Ticket/tag notch size (width x length)			0.236 in. ×	6 mm ×	0.236 in. ×	6 mm × 3 mm
			0.12 in.	3 mm	0.12 in.
Hole diameter			0.125 in.	3 mm	0.125 in.	3 mm
Notch or hole position		Minimum	0.15 in.	3.8 mm	0.15 in.	3.8
(Centered from inner
		Maximum	2.25 in.	57 mm	3.5 in.	90 mm
media edge)
Black mark	Vertical length		0.98 in. to	2.5 to	0.98 in. to	2.5 to
dimensions			0.453 in.	11.5 mm	0.453 in.	11.5 mm
	Horizontal width		> 0.37 in.	> 9.5 mm	> 0.37 in.	> 9.5 mm
	Location		Within 0.40 in. (1 mm) of inside media edge
			May also be centered		May also be centered
			from 0.23 to 2.25 in.		from 0.23 to 3.5 in.
			(5.84 to 57 mm)		(5.84 to 90 mm)
			from the media inner edge		from the media inner edge
Density, in Optical Density Units (UDO)			> 1.0 ODU
Maximum media density			< 0.5 ODU
Transmissive Sensor		Fixed	7/16 in. (11 mm) from inside edge

112 Z4Mplus/Z6Mplus User Guide 13163L Rev. 3 5/20/2004