Zebra Technologies Z6Mplus manual Unpack and Inspect the Printer, Report Damage, Storage

Printer Setup

Unpack and Inspect the Printer

Unpack and Inspect the Printer

•Check all exterior surfaces.

•Raise the media door, and inspect the media compartment.

•Save the carton and all packing material in case the printer needs to be shipped. Contact your authorized Zebra reseller for instructions.

Report Damage

If you discover shipping damage:

•Immediately notify the shipping company and file a damage report.

Important • Zebra Technologies Corporation is not responsible for any damage incurred during the shipment of the equipment and will not repair this damage under warranty

•Keep the carton and all packing material for inspection.

•Notify your local Zebra reseller.

Storage

If you are not placing the printer into operation immediately, repackage it using the original packing materials. The printer may be stored under the following conditions:

•Temperature: –40°F to 140°F (–40°C to 60°C)

•Relative humidity: 5% to 85%, non-condensing

13163L Rev. 3 5/20/2004 Z4Mplus/Z6Mplus User Guide 9