Zebra Technologies Z6Mplus manual Adjust Media Alignment for Rewind Option

Printer Operation

Load Roll Media

Adjust Media Alignment for Rewind Option

The instructions below apply only if the printer has a Rewind option. The liner should be installed flush against the backplate of the rewind spindle to prevent the media/backing from winding too loosely. See Figure 24.

Do the adjustments in the order given. Do only what is needed to solve the problem.

Figure 24 • Rewind Option Adjustment Dial

4

1

2

3

1Rewind Spindle Backplate

2Rewind Spindle

3Adjustment Dial

4Printhead Assembly

To adjust the Media Alignment for Rewind Mode, complete these steps:

1.Turn the adjustment dial clockwise to move the media toward the mainframe.

2.Turn the dial counter clockwise to move the media away from the mainframe.

13163L Rev. 3 5/20/2004 Z4Mplus/Z6Mplus User Guide 37